LTC3230
5-LED Main/Sub Display
Driver with Dual LDO
FEATURES
DESCRIPTION
Low Noise Charge Pump Provides High Ef?ciency
with Automatic Mode Switching
Multimode Operation: 1x, 1.5x, 2x
Full-Scale Current Set Resistor
Up to 125mA Total LED Current
Single Wire Enable/Brightness Control for Main and
Sub Display LEDs
32:1 Linear LED Brightness Control
Dual 200mA Linear Regulators
Four 25mA Low Dropout Main LED Current Sources
One 25mA Low Dropout Sub LED Current Source
Low Noise Constant Frequency Operation
Low Shutdown Current: 3μA
Internal Soft-Start Limits Inrush Current During
Start-Up and Mode Switching
Open/Short LED Protection
No Inductors
20-Lead 3mm × 3mm QFN Package
The LTC ? 3230 is a low noise charge pump DC/DC converter
designed to drive 4 Main LEDs and 1 Sub LED, plus two
200mA linear regulators to provide additional system
power. The LTC3230 charge pump requires only four small
ceramic capacitors and one current set resistor to form a
complete LED power supply and current controller.
Built-in soft-start circuitry prevents excessive inrush cur-
rent during start-up and mode changes. High switching
frequency enables the use of small external capacitors.
Main and Sub full-scale current settings are programmed
by a single external resistor.
Charge pump ef?ciency is optimized based on the voltage
across the LED current sources. The part powers up in 1x
mode and automatically switches to the next higher mode,
1.5x and subsequently 2x, whenever any LED current
source approaches dropout.
Two 200mA linear regulators have independent enable
APPLICATIONS
and output voltage select pins. Each regulator can be set
to one of three pre-selected output voltages with tri-level
Multi-LED Driver and Dual LDO Supplies for Cell
input pins. The regulators may be enabled independently
Phone, PDA, Digital Camera and PND Applications
, LT, LTC and LTM are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners. Protected by U.S. Patents
including 6411531.
TYPICAL APPLICATION
of the charge pump.
The LTC3230 is available in a low pro?le (0.75mm) 3mm
× 3mm 20-lead QFN package.
C1
C2
1 F
1 F
100
Ef?ciency vs V IN Voltage
V IN = 2.7V
TO 5.5V
C3
2.2 F
C1P C1M C2P C2M
V IN CPO
LTC3230
125mA
C6
1 F D1
D2
MAIN
D3
D4
SUB
D5
90
80
70
ENM
ENS
ENM
ENS
MLED1
MLED2
MLED3
MLED4
60
50
40
ENLDO1
ENLDO2
V1
V2
SLED
LDO1
C4
1 F
1.5V
200mA
3230 TA01a
30
20
4 LEDs AT 9mA/LED
R SET
17.4k
1%
R SET
GND
LDO2
C5
1 F
2.8V
200mA
10
0
3
V F = 3V
T A = 25 ° C
3.2
3.4
3.6
3.8
4
4.2
4.4
ENM OR ENS
V IN (V)
SET BRIGHTNESS LEVEL
ON
OFF
3230 TA01b
3230fa
1
相关PDF资料
LTC3452EUF#TRPBF IC LED DRIVER PHOTO FLASH 20-QFN
LTC3453EUF#TRPBF IC LED DRIVER PHOTO FLASH 16-QFN
LTC3454EDD#TRPBF IC LED DRIVER PHOTO FLASH 10-DFN
LTC3490EDD#PBF IC LED DRIVER PHOTO FLASH 8-DFN
LTC3783EFE#PBF IC LED DRVR PWM CONTROL 16-TSSOP
LV5026MC-AH IC LED DRIVER 1CH HV 10SOIC
LV5213LP-TE-L-E IC LED DVR 3CH CELL PHONE VCT16
LV5216CS-TE-L-E IC LED DRIVER 10CH CELL 36WLP
相关代理商/技术参数
LTC3230EUD#TRPBF 功能描述:IC LED DRIVR WHITE BCKLGT 20-QFN RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 标准包装:6,000 系列:- 恒定电流:- 恒定电压:- 拓扑:开路漏极,PWM 输出数:4 内部驱动器:是 类型 - 主要:LED 闪烁器 类型 - 次要:- 频率:400kHz 电源电压:2.3 V ~ 5.5 V 输出电压:- 安装类型:表面贴装 封装/外壳:8-VFDFN 裸露焊盘 供应商设备封装:8-HVSON 包装:带卷 (TR) 工作温度:-40°C ~ 85°C 其它名称:935286881118PCA9553TK/02-TPCA9553TK/02-T-ND
LTC3230EUD-PBF 制造商:LINER 制造商全称:Linear Technology 功能描述:5-LED Main/Sub Display Driver with Dual LDO
LTC3230EUD-TRPBF 制造商:LINER 制造商全称:Linear Technology 功能描述:5-LED Main/Sub Display Driver with Dual LDO
LTC3240 制造商:LINER 制造商全称:Linear Technology 功能描述:3.3V/2.5V Step-Up/ Step-Down Charge Pump DC/DC Converter
LTC3240-2.5 制造商:LINER 制造商全称:Linear Technology 功能描述:Wide VIN Range, Low Noise, 250mA Buck-Boost Charge Pump
LTC3240-3.3 制造商:LINER 制造商全称:Linear Technology 功能描述:Wide VIN Range, Low Noise, 250mA Buck-Boost Charge Pump
LTC3240EDC-2.5 制造商:LINER 制造商全称:Linear Technology 功能描述:3.3V/2.5V Step-Up/ Step-Down Charge Pump DC/DC Converter
LTC3240EDC-2.5#TRMPBF 功能描述:IC REG MULTI CONFIG 2.5V 6DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 类型:升压(升压) 输出类型:两者兼有 输出数:1 输出电压:5V,2 V ~ 16.5 V 输入电压:2 V ~ 16.5 V PWM 型:- 频率 - 开关:45kHz 电流 - 输出:50mA 同步整流器:无 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:8-DIP(0.300",7.62mm) 包装:管件 供应商设备封装:8-PDIP